Swift K33A is the highly advanced and accurate IPAAS Core-to-Core alignment fusion splicer, which has all-in-one features as follows: stripping, cleaning, cleaving, splicing and sleeving. And also Swift K33A can be used for terminating the fusion Splice-On Connector (SOC) for FTTH network and Data Center.
Scratch and Crack Found
No Scratch and Crack on the fiber
UCLSwift’s fusion splicers integrate thermal stripping, cleaning, cleaving, splicing and splice protection in to one convenient unit, reducing installation time and improving connection reliability. ALLINONE provides excellent working platform for high productivity.
Auto Thermal Stripping
Water and dust resistant
No crack on fiber
No scratches from heated stripping.
1 second strip time.
Over 5 kgf tensile strength of fiber after stripping.
Featuring excellent tensile force of fiber, the automatic stripper strips up to 28mm in length without damaging the surface of fiber.
Minimum stripping length should be longer than 18mm.
The alcohol pump can be removed and refilled with cleaning fluid.
Avoid splashing the alcohol please cover the top part of dispenser with cleaning cotton and push it.
Designed to cleave the fiber at a 90 degree angle.
The fiber shards are collected in the slide-type chip box placed at the side of body.
Splicing available from 1 core to 12 cores.
After splicing the fiber splice must be visually perfect.
Electrode life up to 18,000 splices.
Shrink down takes 20-35 seconds.
Equipped with a sleeve loader to prevent contamination and provide convenience.
Increased productivity from built-in sleeving unit.
See K33A from various angles.
It may take some time for the pop-up to appear.
Up to 18,000 splices
Providing remote maintenance
service via Internet
IPAAS Core Alignment
Typical splice loss
SM: 0.02 dB, MM:0.01 dB,
DS: 0.04 dB, NZDS:0.04 dB
No. of splice cycles with battery
200 cycles (4,700mAh), 280 cycles (6,000mAh)
2N / 4.4N (optional)
Over 17.8N – TR/NWT-000955 specs
77,000 fibers + 33,000 fibers
(Adjust the blade height up to 0.12mm),
Total 110,000 fibers
Fiber cleave length
250um: 5 ~ 16 mm, 900um: 8 ~ 16 mm
Typical 9 seconds
Sleeve heating time
9 sec (IS-45 mode), 13 sec (IS-60 mode)
136 (W) x 215 (L) x 137 (H)(excluding bumper)
2.45 kg (including battery)
·Arc fusion splicer SWIFT K33A
·User guide (Download from UCLSwift Website)
·Battery 6,000 mAh
·Cleaver blade BI-07
·DC 12V available for car cigar jack
·Sleeve IS-60 (60mm); IS-40 (40mm)
·Optical fiber holder
HS-250, HS-900, HS-2.5F, HS-SC/FC, HS-ILC, HS-ST, LS-900 (Loose tube)
·SOC connector SC, LC, FC, ST